CIGAR HUMIDOR COOLER USER GUIDE SHMCC0251SS | SHMCC0331SS | SHMCC0501SS
Thank you for purchasing the Schmécké Cigar Humidor Cooler.This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. Please read all directions before using the product and retain this guide for reference.This product is intended for household use only. This product is covered by a limited one-year warranty.
BOX CONTENTS REQUIRED TOOLS Cigar Cooler Philips-head screwdriver 2x screws for handle assembly Handle User guide PARTS 1. Cabinet 2. LED lamp 3. Wood shelves 4. Cigar drawer 5. Hygrometer 6. Plastic reservoir 7. Nonslip feet 8. Lower hinge 9. Door gasket Model SHMCC0251SS Model SHMCC0331SS 10. Tempered glass door 11.
SETTING UP THE CIGAR COOLER 1. When choosing a location to store the cigar cooler, be aware of the following: a. Be sure that it is placed on a sturdy, level surface that is strong enough to support it when full. b. Ensure there is at least 6-inches of space behind the cooler and 10-inces of space on either side.This will ensure proper air ventilation. c. It is not recommended to place the cooler on a carpet or rug. 2.
MAINTAINING CIGAR HUMIDITY 1. Fill the humidity tray (small plastic reservoir) to about ¾ full with 100% distilled water. 2. Place the filled reservoir onto the bottom of the cigar cooler. 3. Regularly check the water level and refill as necessary. 4. The recommended humidity level for cigars is between 65% and 75%. Use the built-in hygrometer to moderate the humidity level. a. If the humidity is less than 65%, leave the reservoir inside until the humidity rises above 65% but is less than 75% b.
TROUBLESHOOTING (continued) The cigar cooler vibrates while operating. The cigar cooler produces a lot of noise. The cooler is positioned on an unstable surface. The cooler is positioned on an unstable surface. The fan may not be working properly. The cooler is positioned on an unstable surface. The doors are reversed and not properly installed. The seal has weakened. The main control board may be damaged or otherwise malfunctioning. The plug may be damaged. The cigar cooler will not close properly.
