SDS

MATERIAL SAFETY DATA SHEET
PREMIER BUILDING SOLUTIONS, INC.
Page 4 of 10
Version: 1.3
Revision Date 01/07/2014
XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT
4
8. EXPOSURE CONTROLS & PERSONAL PROTECTION
Component Exposure Limits
CAS Number
Component Name Exposure Limits
64742-46-7 Hydrotreated middle petroleum OSHA PEL (final rule) and ACGIH TLV for oil mists: TWA 5
Distillates. mg/m3
17689-77-9 Ethyltriacetoxysilane See acetic acid comments.
4253-34-3 Methyltriacetoxysilane See acetic acid comments.
7429-90-5 Aluminum OSHA PEL (final rule): TWA 15 mg/m3 total
dust, 5 mg/3 respirable dust. ACGIH TLV:TWA 10 mg/m3
Acetic acid is formed upon contact with water or humid air. Provide adequate ventilation to control exposures within
guidelines of OSHA PEL: TWA 10 ppm and ACGIH TLV: TWA 10 ppm, STEL 15 ppm.
Engineering Controls
Local Ventilation: Recommended.
General Ventilation: Recommended.
Personal Protective Equipment for Routine Handling
Eyes: Use proper protection - safety glasses as a minimum.
Skin: Wash at mealtime and end of shift. Contaminated clothing and shoes should be removed as
soon as practical and thoroughly cleaned before reuse. Chemical protective gloves are
recommended.
Suitable Gloves: Avoid skin contact by implementing good industrial hygiene practices and procedures. Select
and use gloves and/or protective clothing to further minimize the potential for skin contact.
Consult with your glove and/or personnel protective equipment manufacturer for selection of
appropriate compatible materials.
Inhalation: Use respiratory protection unless adequate local exhaust ventilation is provided or exposure
assessment demonstrates that exposures are within recommended exposure guidelines. IH
personnel can assist in judging the adequacy of existing engineering controls.