SDS

MATERIAL SAFETY DATA SHEET
PREMIER BUILDING SOLUTIONS, INC.
Page 5 of 10
Version: 1.3
Revision Date 01/07/2014
XTRABOND 250 100% RTV ACETOXY SILICONE SEALANT
5
Suitable Respirator: Respiratory protection is not needed under ambient conditions. If vapor is generated when
material is heated or handled, the following is advised. General and local exhaust ventilation is
recommended to maintain vapor exposures below recommended limits. Where concentrations
are above recommended limits or are unknown, appropriate respiratory protection should be
worn. Follow OSHA respirator regulations (29 CFR 1910.134) and use NIOSH/MSHA
approved respirators.
Personal Protective Equipment for Spills
Eyes: Use full face respirator.
Skin: Wash at mealtime and end of shift. Contaminated clothing and shoes should be removed as
soon as practical and thoroughly cleaned before reuse. Chemical protective gloves are
recommended.
Inhalation/Suitable Respiratory protection recommended. Follow OSHA Respirator Regulations
Respirator: (29 CFR 1910.134) and use NIOSH/MHSA approved respirators. Protection provided by air
purifying respirators against exposure to any hazardous chemical is limited. Use a positive
pressure air supplied respirator if there is any potential for uncontrolled release, exposure
levels are unknown, or any other circumstance where air purifying respirators may not provide
adequate protection.
Precautionary Avoid eye contact. Avoid skin contact. Avoid breathing vapor. Keep container closed. Do not
Measures: take internally. Use reasonable care.
Comments: Product evolves acetic acid (HOAc) when exposed to water or humid air. Provide ventilation
during use to control HOAc within exposure guidelines or use respiratory protection. When
heated to temperatures above 150°C (300°F) in the presence of air, product can form
formaldehyde vapors. Physical and health hazard information is readily available on the
Material Safety Data Sheet.
Note: These precautions are for room temperature handling. Use at elevated temperature or aerosol/spray applications may require added precautions.
9. PHYSICAL & CHEMICAL PROPERTIES
Physical Form: Paste
Color: See product name
Odor: Acetic acid odor
Specific Gravity @ 25°C: 1.007
Viscosity: Not determined.
Freezing/Melting Point: Not determined.
Boiling Point: Not determined.
Vapor Pressure @ 25°C: Not determined.
Vapor Density: Not determined.
Solubility in Water: Not determined.