Replacement Part List

Page 5 of 6

STEP 4

1. Install rubber bumpers to front and back of left and

right struts.

STEP 5

1. Remove nuts from bows and attach left and right

struts with wide ange facing out.

2. Tighten all bolts.

STEP 6

1. For straight up and rear leaning roll bars insert

two (2) 3/8 x 1 bolts in holes (A) with head of bolt

against weld nut.

2. For forward leaning roll bars use holes (B)

3. Repeat procedure for other strut and tighten bolts.

STEP 7

1. Install lock to pin on roll bar bracket using washer

and cotter pin.

2. Spread cotter pin.

3. Repeat procedure for other side.

2162_012.JPG

2126_054.JPG

2126_016.JPG

2126_030A.JPG

2126_009.JPG