Datasheet

ManualsBrandsUnbranded ManualsHighPower-LEDsHighPower LED Royal-blue 3 W 30.6 lm 3.2 V 350 mA

PRODUCT FAMILY DATA SHEET

notice. Cree

, the Cree logo and XLamp

are registered trademarks of Cree, Inc.

CLD-DS18 REV 17

Cree

XLamp

XP-E LEDs

PRODUCT DESCRIPTION

The XLamp XP-E LED combines the

proven lighting-class performance

and reliability of the XLamp

XR-E LED in a package with 80%

smaller footprint. The XLamp XP-E

LED continues Cree’s history of

innovation in LEDs for lighting

applications with wide viewing

angle, symmetrical package,

    

neutral thermal path.

Cree XLamp LEDs bring high

performance and quality of light to a

wide range of lighting applications,

including color-changing, portable

and personal, outdoor, indoor-

directional, transportation, stage

and studio, commercial and

emergency-vehicle lighting.

FEATURES

 

80-CRI, 85-CRI and 90-CRI

white, royal blue, blue, green,

amber, red & red-orange

     

1 A

 

as 9 °C/W

 

150 °C

 

 



 

020C compatible

 

 

 

(E349212)



Cree, Inc.

4600 Silicon Drive

Durham, NC 27703



TABLE OF CONTENTS

Characteristics .......................... 2

 ........ 3

 ......... 4

Relative Spectral Power

Distribution............................... 6



Temperature ............................. 7

Electrical Characteristics ............. 8

Thermal Design ......................... 9

 ...........10

Relative Chromaticity vs. Current

and Temperature - Warm White ..11

Typical Spatial Distribution .........12

 .13

Notes ......................................14

..............15

Tape and Reel ..........................16

Packaging ................................17

Summary of content (17 pages)

PAGE 1
® ® Cree XLamp XP-E LEDs Product Description FEATURES The XLamp XP-E LED combines the • Available in white, outdoor white, Table of Contents 80‑CRI, 90‑CRI Flux Characteristics - White......... 3 and white, royal blue, blue, green, Flux Characteristics - Color.......... 4 amber, red & red‑orange Relative Spectral Power reliability of the XLamp XR-E LED in a package with 80% smaller footprint.
PAGE 2
xlamp xp-e leds Characteristics Characteristics Unit Thermal resistance, junction to solder point - white, royal blue, blue °C/W 9 Thermal resistance, junction to solder point - green °C/W 15 Thermal resistance, junction to solder point - amber, red, red-orange °C/W 10 Viewing angle (FWHM) - white degrees 115 Viewing angle (FWHM) - royal blue, blue, green, red, red-orange, amber degrees 130 Temperature coefficient of voltage - white mV/°C -3.
PAGE 3
xlamp xp-e leds Flux Characteristics (TJ = 25 °C) - White The following table provides several base order codes for XLamp XP-E LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XP Family Binning and Labeling document. Color CCT Range Min.
PAGE 4
xlamp xp-e leds Flux Characteristics (TJ = 25 °C) - Color The following table provides several base order codes for XLamp XP-E LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp XP Family Binning and Labeling document. Dominant Wavelength Range Min. Color Group Royal Blue Max.
PAGE 5
xlamp xp-e leds Flux Characteristics (TJ = 25 °C) - Color (continued) Dominant Wavelength Range Min. Color Group Amber Max. DWL (nm) A2 585 Group DWL (nm) A3 595 Dominant Wavelength Range Min. Color DWL (nm) Group RedOrange Max. O3 610 DWL (nm) Group O4 620 Dominant Wavelength Range Min. Color Group Red R2 Max. DWL (nm) 620 Group R3 DWL (nm) 630 Base Order Codes Min. Luminous Flux (lm) @ 350 mA Group Flux (lm) M3 45.7 Order Code XPEAMB-L1-0000-00301 N2 51.
PAGE 6
xlamp xp-e leds Relative Spectral Power Distribution Relative Radiant Power (%) Relative Spectral Power 100 80 5000K 10000K CCT 3700K 5000K CCT 2600K 3700K CCT 60 40 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) White Relative Radiant Power (%) (%) Relative Radiant Power XP Color Graph 1100 80 100 Blue 80 60 Green Royal Blue Blue 60 40 Amber RedOrange Red Amber Green 40 20 Red-Orange 20 0 Red 400 450 500 400 450 500 0 550 600 650 700 750 Wavelength (nm) 650 5
PAGE 7
xlamp xp-e leds Relative Flux vs.
PAGE 8
Blue xlamp xp-e leds Electrical Characteristics (TJ = 25 °C) 700 Forward Current (mA) 600 500 400 Red, Red Orange 300 200 100 0 Graph 5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Forward Voltage (V) 1000 900 1000 Forward Current (mA)(mA) Forward Current 800 900 700 800 600 White, Royal Blue, Blue 700 500 600 Green 400 500 White, Royal Blue, Blue 300 400 Green 200 300 100 200 Graph 6 100 0 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 3.
PAGE 9
xlamp xp-e leds Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to 1100 1100 1000 1000 900 900 Maximum Current (mA) Maximum Current (mA) ambient in order to optimize lamp life and optical characteristics.
PAGE 10
xlamp xp-e leds Relative Flux vs.
PAGE 11
Relative L 50 Graph 14 0 0 100 200 300 400 500 600 700 800 900 xlamp xp-e leds 1000 Forward Current (mA) Relative Flux vs. Current (TJ = 25 °C) (continued) Relative Luminous Flux (%) 160 140 120 100 Amber 80 60 40 20 0 0 100 200 300 400 500 Forward Current (mA) Warm White Warm White Relative Chromaticity vs. Current and Temperature - Warm White 0.020 0.015 0.020 0.010 0.015 0.005 0.010 0.000 0.005 -0.005 0.000 -0.010 -0.005 ΔCCx -0.015 -0.010 -0.020 -0.015 ΔCCy -0.
PAGE 12
xlamp xp-e leds Typical Spatial Distribution Relative Luminous Intensity (%) 120 100 80 White Blue, Royal Blue 60 Red, Red-Orange, Amber Green 40 20 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Angle (°) Copyright © 2008-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc.
PAGE 13
xlamp xp-e leds Reflow Soldering Characteristics In testing, Cree has found XLamp XP-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder 3 °C/second max.
PAGE 14
xlamp xp-e leds Notes Lumen Maintenance Projections Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document at www.cree.com/xlamp_app_notes/LM80_results. Please read the XLamp Long-Term Lumen Maintenance application note at www.cree.
PAGE 15
xlamp xp-e leds All Measurements are .13mm unless otherwise indicated Mechanical Dimensions (TA = 25 °C) All measurements are ±.13 mm unless otherwise indicated. Anode 3.30 2.00 3.45 .73 2.30 .50 3.45 Anode 2.6 1.30 Top View .50 Side View .50 Bottom View .60 1.30 1.20 .60 .65 .50 .40 3.20 3.30 1.60 1.65 .40 .40 .40 .50 3.20 3.30 RECOMMENDED PCB SOLDER PAD RECOMMENDED STENCIL PATTERN (HATCHED AREA IS OPENING) Copyright © 2008-2013 Cree, Inc. All rights reserved.
PAGE 16
6 5 4 3 2 1 REVISONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. REV DETAIL B SCALE 2 : 1 D BY DATE A Released J.L. 6/30/09 C D Match supplier drawing DDS 10/21/10 DESCRIPTION Zone A6, 2.15 was 2.1, tolerance was ± Zone C2, Added pocket dimensions. .10 . DDS E Zone A6, 2.
PAGE 17
xlamp xp-e leds Packaging Unpackaged Reel Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Code, Qty, Reel ID Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Packaged Reel Patent Label Label with Customer Order Label with Cree Order Code, Code, Qty, Reel ID, PO # Qty, Reel ID, PO # Label with Cree Bin Code, Qty, Reel ID Boxed Reel Label with Cree Order Code, Qty, Re