Datasheet

ManualsBrandsUnbranded ManualsOptoelectronics & DisplaysUV emitter 405 nm SMD

ROSCHWEGE GmbH

Germany

D a t a s h e e t

High Efficacy UV LED Emitter

400nm / 10W

RSW-P10-400-0

 High Efficacy 10W UV LED

Ultra-small foot print – 7.0mm x 7.0mm x 4.3mm

Surface mount ceramic package with integrated glass lens

Very low Thermal Resistance (1.8°C/W)

Individually addressable die

Very high Radiant Flux density

JEDEC Level 2 for Moisture Sensitivity Level

Autoclave complaint (JEDEC JESD22-A102-C)

Lead (Pb) free and RoHS compliant

Reflow solderable (up to 6 cycles)

Emitter available on MCPCB (optional)

The RSW-P10-400-0 UV LED emitter provides superior radiometric power in the

wavelength range specifically required for sterilization, dental curing lights, and

numerous medical applications. With a 7.0mm x 7.0mm ultra-small footprint, this package

provides exceptional optical power density. The radiometric power performance and

optimal peak wavelength of this LED are matched to the response curves of many dental

resins, resulting in a significantly reduced curing time. The patent-pending design has

unparalleled thermal and optical performance. The high quality materials used in the

package are chosen to optimize light output, have excellent UV resistance, and minimize

stresses which results in monumental reliability and radiant flux maintenance.

Date: 01.12.2012 - Roschwege GmbH - Germany - reserves the right to make changes to improve performance without notice.

Summary of content (6 pages)

PAGE 1
ROSCHWEGE GmbH Germany Datasheet High Efficacy UV LED Emitter 400nm / 10W RSW-P10-400-0 High Efficacy 10W UV LED   Ultra-small foot print – 7.0mm x 7.0mm x 4.3mm  Surface mount ceramic package with integrated glass lens  Very low Thermal Resistance (1.
PAGE 2
Absolute Maximum Ratings Parameter DC Forward Current Peak Pulsed Forward Current Reverse Voltage Storage Temperature Junction Temperature Soldering Temperature Allowable Reflow Cycles ESD Sensitivity Symbol Value Unit IF IFP VR Tstg TJ Tsol 1000 mA 1000 mA See Note 1 V -40 ~ +150 °C 125 °C 260 °C 6 > 1 kV HBM Class 3B JESD22-A114-D 1) LEDs are not designed to be reverse biased Optical Characteristics @ TC = 25°C Parameter Radiant Flux (@ IF = 700mA) Radiant Flux (@ IF = 1000mA) Peak Wavelength Viewi
PAGE 3
Typical Radiation Pattern Typical Normalized Radiant Flux vs. Forward Current @ TC = 25°C. Date: 01.12.2012 - Roschwege GmbH - Germany - reserves the right to make changes to improve performance without notice.
PAGE 4
Typical Forward Current vs. Forward Voltage @ TC = 25°C. Typical Normalized Radiant Flux vs. Case Temperature. Date: 01.12.2012 - Roschwege GmbH - Germany - reserves the right to make changes to improve performance without notice.
PAGE 5
Typical Peak Wavelength Shift over Temperature Current Derating 1. Maximum current assumes that all four LED dice are operating concurrently at the same current. 2. RΘJ-C [Junction to Case Thermal Resistance] for the RSW-P10-400-0 is typically 1,8°C/W. 3. RΘJ-A [Junction to Ambient Thermal Resistance] = RΘJ-C + RΘC-A [Case to Ambient Thermal Resistance]. Date: 01.12.2012 - Roschwege GmbH - Germany - reserves the right to make changes to improve performance without notice.
PAGE 6
Notes: ROSCHWEGE GmbH Technical LED-Solutions Germany Technical modifications and errors reserved Date: 01.12.2012 - Roschwege GmbH - Germany - reserves the right to make changes to improve performance without notice.