6 x 4 Metal Garden Shed Instructions for Assembly Requires two people and takes 1 hours for installation, You will receive totally 2 boxes, please make sure you get 1x (A} box and 1x {B) box before assembly. Just feel free to contacts if you have any problem, we will try our best to help you solve the issue.
PLAN AHEAD Before beginning installation, check local building codes reg arsing footings, location and other requirements, Study and understand this instruction. important information and helpfulness make your installation easier and more enjoyable. Tools and Materials: There are some basic tools and mater als you will need for the installation, Decide which method of anchoring and the type of foundation you wish to use in order to form a complete list of the materials you will need.
parts lis PART i, Qty. PART 6. aty. a1 2 Wis 7 Az i W28 4 Bt 1 AWS 2 BAIL 1 psi 2 852 1 ps2 2 B2, 1 ps3 2 BF3 2 ps4 DLA 1 6 1 DRA 1 M7 2 ust 1 Mg 2 SIR 1 Wiz ) vs2 1 o .
3 inert thief doorcolumni{ULA) into the wall panel. Then secure the (ULA) with screw (F1). Repeat the same for the fight door columnar. Note: Deep opening of the doorbell is on the top and shallow is helot. PART ULA or1) insert the corner guard {C2) intent top-angle barbarous) first, then connect the {US1) and (SIR) together via the connector (GS)as following pleasures shown, as following pictures shown, Then place the installed (UST) on the top of wall panel.
10 Assemble the roof flashing (M6}, (M7}, (M8) and {M12), and secure them with corner guards (6C).
12 PART | NG Gty Connect the door pave {DLA] dnd (DRA] with the door column via screws (F3) as pictures shown. Please use the plastic wrap's} o cover the end screwballs {F1] to avoid safety problems such asseverates.
6 x 4 Metal Garden Shed QRA 1.0: Missing parts when received. A: Please check if you already received 2 boxes we shipped to you, Sometimes the 2 boxes will not arrive in same date, hope you can wait for 2:3 more days or contact us for more help: if you already have 2 boxes, please kindly send us massages to lutes know the number of missing part regarding to the parts list, We will send replacement to you asap. 2.
1. We are concerned about each customer's experience, if there is any loss ar damage, please contacts at any time, we will provide solutions for you soon, 2.1t Is recommended to assemble more than 2 people, be careful during installation to avid injury. 3. There is a protective film on the surface of the product. if there are Minot scratches, please remove the protective film. (The protective film can protect the product from scratches. Recommending not to remove the protective film if not necessary.