Certifications 2

according to Regulation (EC) No 1907/2006
Safety Data Sheet
Phono-Zubehör-Vertrieb GmbH
Revision date: 20.02.2017
stylus cleaner
Product code: 6072 Page 4 of 11
General protection and hygiene measures: See section 8.
7.2. Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a cool, well-ventilated place. Protect against direct sunlight.
Ensure adequate ventilation of the storage area.
Make sure spills can be contained (e.g. sump pallets or kerbed areas).
Requirements for storage rooms and vessels
Do not store together with: Gas. Explosives. Flammable solids. Pyrophoric liquids and solids. Self-heating
substances and mixtures. Substances and mixtures which, in contact with water, emit flammable gases.
Oxidizing liquids. Oxidizing solids. ammonium nitrate. Self-reactive substances and mixtures. Organic
peroxides. Non-combustible toxic substances. Radioactive substances. Infectious substances.
Advice on storage compatibility
Keep the packing dry and well sealed to prevent contamination and absorbtion of humidity.
Protect against: UV-radiation/sunlight. heat. moisture. frost.
storage temperature: 15-25°C
Further information on storage conditions
7.3. Specific end use(s)
refer to chapter 1.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Exposure limits (EH40)
Categoryfibres/mlmg/m³ppmSubstanceCAS No Origin
TWA (8 h)400Propan-2-ol67-63-0 999 WEL
STEL (15 min)500 1250 WEL
8.2. Exposure controls
Provide adequate ventilation as well as local exhaustion at critical locations.
Professional: Use only outdoors or in a well-ventilated area.
Appropriate engineering controls
The usual precautions for handling chemicals should be considered.
Keep away from food, drink and animal feedingstuffs.
Always close containers tightly after the removal of product. When using do not eat, drink, smoke, sniff. Wash
hands before breaks and after work. Protect skin by using skin protective cream. Take off contaminated
clothing and wash it before reuse.
Protective and hygiene measures
Recommended eye protection brand: Tightly sealed safety glasses. (DIN EN 166)
Eye/face protection
In case of prolonged or frequently repeated skin contact: Wear suitable gloves.
Suitable material:
Butyl rubber.
Thickness of glove material: 0,5 mm
penetration time (maximum wearing period): 480 min.
NBR (Nitrile rubber)
Hand protection
Revision No: 1,0 GB - EN Print date: 21.02.2017