PIPELINE & DRAIN INSPECTION SYSTEMS WITH 512Hz TRANSMITTER ASSEMBLY AND OPERATING INSTRUCTION -----------------------------------------------------------------Read these instructions completely before operating the device PLEASE CHARGE BATTERY FIRST BEFORE USE!
4) Battery specifications: 1. Total Power 20W 2. Lithium Battery 12VDC MAX.≦ 42Wh 3. Charger 12.5V 1.5A 4. Charger time 6 HOURS 5. Work time ≥530 MINUTES 6. Protective Voltage 9V 7. The voltage before discharging 12.5V 8. Load current 780mA (INPUT 12.5V) ASSEMBLY PARTS LIST PART NO.
Attention 1. Read this manual carefully before using this system. 2. Avoid using the device in extremely cold, heat, or humidity environment, it may damage the device. 3. Do not drop or press hard on the device. 4. Warranty invalidation if the device is disconnected by users or has any physical damages. 5. Always back up your date before connecting your SD device to this system. The manufacturer is not responsible for any date damage on your device for any reason. 6.
• Do not close the case with wet equipment inside as this will increase the risk of mould. • Clean the rest of the equipment with a clean dry cloth. Never use solvents or abrasive solutions. KNOW YOU DEVICE DIGITAL MONITOR OSD Interface Operation The font and text size are fixed and cannot be changed. The basic operation of the text overlay unit is straight forward. A flashing underscore cursor indicates the current screen position. This cursor can be moved around the screen by the keyboard cursor keys.
CONTROL BOX Time stamp setting LED BRIGHT MIN. MAX. CAMERA REM SD REC STATUS Memory Card P LAY PAUSE 24 STOP DVR POWER System Setting Language ESC REPLAY BATTERY INDICATOR Time MENU OK / REC VIDEO OUT Format Yes Card info No MIC on off MIC Date Format Time stamp Batt./EXT DC 12 V 1. CHARGE DC 12 V USB KEYBOARD Switch（CHARGE,OFF,AV,DVR） EARPHONE FUSE 2. LED bright adjust knob 3. Video output jack 4. Battery level indicator 5. DVR up selector button 6.
Note:“Format”will delete all files in SD card(All files will lost and can not get them back) Check the SD card capacity DVR Remote controller System Setting Language Time Format Card Info Date Format Time stamp Card info Total Size：7598MB Usage Size：0.1％ Button Remain Size：99.
Time and date setting save Keys on DVR Time LED BRIGHT MIN. MAX.
Icons on screen Language Setting Standby Model Time and Date System Setting 2014/4/15 15:14:18 Language Video status Time English Format SD Card lnit...
DVR Setting Image setting Image quality setting Set Up Image setting REC.
Playback and delete the video file Image Setting Set Up Quality Image Setting Frame Rate REC.
5fps: intermittent image Press“MENU”enter in the main meun Note:The frame rate is lower, the recording time is llonger Overwrite Resolution Setting REC.Setting Image Setting Overwrite Quality Frame Rate D1 Resolution Section Yes No VGA QVGA Note:If the SD card capacity is full ,the DVR will delete the earliest 300MB file , then will start to record new file Section D1:704×576 VGA:640×576 QVGA:320×288 Note:The resolution is lower，the recording time is llonger REC.Setting REC.
