Replacement Part List

• Do not close the case with wet equipment inside as this will increase the risk of mould.

• Clean the rest of the equipment with a clean dry cloth. Never use solvents or abrasive

solutions.

OSD Interface Operation

The font and text size are fixed and cannot be changed.

The basic operation of the text overlay unit is straight forward. A flashing underscore cursor

indicates the current screen position. This cursor can be moved around the screen by the

keyboard cursor keys. The cursor will wrap around the screen left and right, top and bottom. If

no key is pressed then the cursor will disappear after approximately ten seconds. The video

text overlay unit uses the standard UK keyboard mapping.

Standard UK keyboard mapping used by the video text overlay unit. By default all UK units

are supplied with this.

The alphanumeric characters in the QWERTY section of the keyboard and the keys of the

numeric keypad can be typed directly to the screen as would normally be expected. Each

alphabetic character key is normally lowercase. Uppercase characters can be typed by

holding down the shift key or pressing the CAPS LOCK key. The keyboard’s LED indicators

will not be lit by the unit.

Note:

 Press F9: Clear the screen

 If the camera is PAL system, press “F1” to match the keyboard,and setup DVR to

“PAL” sytem

 If the camera is NTSC system, press “F2” to match the keyboard,and setup DVR to

“NTSC” sytem

KNOW YOU DEVICE

DIGITAL MONITOR

1. Sub menu down selector

2. Sub menu up selector

3. Menu button

4. video1 video2 selector button（video2 No signal）

5. Power on/off button

6. Remote receiving window and power light window

SKID ASSMABLE