Instructions / Assembly

LED light
Product appearance
Mg-Air Fuel Cell
Accessory
Specifications
Troubleshooting
Note
Dimension
Weight
Material
Output
voltage
Working
time
Water
capacity
Salt
capacity
Illumination
LED
188*110.5*84mm
400g
(Packing except)
ABS & PC
15~22g
(4%-7%Salt density)
120hr
(Mg bar usable life)
10pcs
0.8W
LED 3V
Charge 5V
80-90 lm
350ml
1. In emergency, Tea, Drink, Sea water, Urine etc liquid also
can be used with salt.
2. Working, Mg bar dissolves and the reactants is non-toxic
magnesium hydroxide,which will not contaminate the
environment. Please rest assured.
3. Mg bar may dissolve and bind if you do not change the
saltwater. Change saltwater every 12 hours or empty tank
of saltwater if not used for long time(over 1 week).
4. Mg bar is consumable with useful life 120 hours, replace
the Mg bar after consumed. Please buy from sales agent.
5.
Due to lower current value some devices cannot be
recharged. Please confirm the charging requirement
specification of your device.
LED
does
not light
Water
leakage
▼ Check water level and add a pinch of salt if
water is enough.
▼ Check Mg bar (Maximum working time is
120hours)
▼ Check the water inlet cap and Mg bar storage
installed correctly and press tightly.
The red
LED
turn
off when
charging
▼ Due to lower current value some products
can not be recharged.
Working
temperature
-20℃～60℃
Charge
current
100mA (Max.)
LED Lantern
LED Lantern
Green Energy
●
ECO
●
Emergency
Power button
Wall hanger
Mg bar
Connector
DC jack
Manual*1
Mg bar
storage
Charge
indicator
Power
indicator
Pull up
handle
Cable*1
(DC => USB)
LED power
Sealing bag*3
（
Salt bags
）
Water inlet cap
& Exhaust hole
Put the salt bag
back to Mg bar
storage.
Take out
salt
bags from Mg
bar storage.
Emergency Preparation: Stock salt bags in Mg bar storage.
Press power button and LED lights turn on.
Counter clockwise rotate internal
cover and pull out Mg bar.
Replacing the Mg barStock salt bags
USB device charging function
Take off Mg bar storage cover
and pull off connection cable.
Install new Mg bar and attach
the connector cable and close
Mg bar storage cover.
Both sides of Mg bar must
close tightly in a horizontal
position.
Pack 22g salt.
How to use
Use water container
pour water in.
Triangle mark
is water line.
Open water inlet cap, first pour in salt and then pour in
water up to triangle mark.
Close water inlet cap, and shake the body slightly to combine
the water and salt in the tank.
According to graduated
mark and add 22g salt.
Please replace a new one when Mg bar is consumed.
When mobile charging function is activated,the light turns off,
the red LED turns on. Only use the correct USB connector to
charge your mobile.
Red LED will turn on.
To avoid exhaust hole leaking, Do not tilt.
Connector should avoid to touch the saltwater,
Please wipe dry if touched.
If the temperature is below 0℃ pour in 2 bags
salt to avoid water freeze.
NOTE
Close water inlet cap and keep
exhaust hole open.
Press the exhaust hole and hard shaking before pour out the
saltwater. Pull up water inlet cap and handle to empty water.
Change saltwater every 12 hours or empty tank
of saltwater if not used for long time(over 1 week).
NOTE
SWL-120