Installation Guide

T3 TROFFER ASSEMBLY

INSTALLATION INSTRUCTIONS

The installation must only be performed by a licensed electrician.

To prevent death, injury or damage to property, this product must be installed in accordance to

National Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA 22.1) in Canada.

Disconnect power before installing the product or servicing it.

MIN. 90°C SUPPLY CONDUCTORS

for defects due to shipping.

state and local codes.

Remove cover from Power Supply/Junction Box by removing two

screws.

Connect wiring as shown. Grey and Purple wiring are for 0 - 10V

Reattach cover of Junction Box and secure with two screws.

Turn power on and verify that the panel is lit.

Luminaire

LED Driver

White

Black

Com

Line

GND

Junction Box

Blue

RedRed

Grey

Purple

1-10V (-)

1-10V (+)

Blue*

NICOR, Inc. January 12, 2015 5:26 PM

*may be black wire with blue tag

Model(s):

T3C-14-MV-35

T3C-14-MV-40

T3C-14-MV-50

T3C-22-MV-35

T3C-22-MV-40

T3C-22-MV-50

T3C-24-MV-35

T3C-24-MV-40

T3C-24-MV-50

PAGE 1
T3 TROFFER ASSEMBLY INSTALLATION INSTRUCTIONS Model(s): T3C-14-MV-35 T3C-14-MV-40 T3C-14-MV-50 T3C-22-MV-35 T3C-22-MV-40 T3C-22-MV-50 T3C-24-MV-35 T3C-24-MV-40 T3C-24-MV-50 The installation must only be performed by a licensed electrician. To prevent death, injury or damage to property, this product must be installed in accordance to National Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA 22.1) in Canada. Disconnect power before installing the product or servicing it. MIN.