Instructions / Assembly

Instruction:
Each package contains one TreeDiaper
TM
treemats for container plants. For best result, follow
these procedures to make sure your plants receive water from the TreeDiaper
TM
treemats during
drought and in between watering.
Procedure A (For indoor plants):
1. soak the plant mat in your sink, bowl or a bucket filled with a couple gallons water overnight (or
at least 5 hours). Add water to make sure the plant mats are in the water.
2. place the soaked plant mat on top of soil around plant stem in the container;
3. depending on room temperature and humidity level, this plant mat may last 3 to 5 weeks. When
the water amount in the plant mat is less than ¼ of the initial weight, redo step 1.
Procedure B (For outdoor uses):
1. soak the plant mat in your sink, bowl or a bucket filled with a couple gallons water overnight (or
at least 5 hours). Add water to make sure the plant mats are in the water.
2. place the soaked plant mat on top of soil around plant stem in the container;
3. Rain and/or irrigation can recharge the plant mats, but check the plant mat once every week to
make sure there is at least ¼ of the initial weight, if not redo step 1 or
4. water the plants as needed normally.
Notice: Don’t place any soil, dirt, fine sand, compost, or iron-based sticks on top of TreeDiaper,
which may result in the loss of functionalities of the product. Direct contact of fertilizers with the
TreeDiaper in use or in storage may temporarily or permanently affect the performance of the
product. The surface integrity of the Product can be cut by sharp objects (lawnmower, or
tool/equipment etc.). It may bring adverse effect on the functionality of the Product.
If you have any questions, please email [e-mail].
TreeDiaper
TM
F
or Container Plants
Darker Side Facing up