Datasheet

P&N Technology (Xiamen) Co.,Ltd.
Copyright P&N Technology Corporation. P&N Technology reserves the right to change these specifications without notice.
Rev 01
1
/
2
BThermoelectric Generator Performance Specifications
TEG-127006-30X34 W150mm
Cold SideTemperature(
o
C)
30
o
C
Hot SideTemperature(
o
C)
100
o
C
200
o
C
Voc (V)
3.52
8.54
V Load (V)
1.76
4.27
I Load (A)
0.32
0.67
R in (Ω)
5.51
6.4
R Load (Ω)
5.51
6.4
W Load (W)
0.56
2.8
Module Resistance(Ohms)
@ 25
o
C
4.16
**Tolerances for thermal and electrical parameters ± 10%
Voc:Open circuit voltage (V)
V Load: Output voltage, corresponded to matched load (V)
I Load: Output current, corresponded to matched load (A)
R in:Module internal resistance at 65
o
C & 115
o
C (Ohm)
R Load: Output resistance, corresponded to matched load (Ohm)
W Load:Output power, corresponded matched load (W)
Cold side thermal resistance = 0°C/W;
Due to the contact resistance of the surface roughness, surface contact area, contact pressure and other
factors are very complex, and mostly are nonlinear factors. Therefore, the actual use of the generating
performance should be lower than the above list.