Use and Care Manual

Operation

Adjusting and turning on the

Adjusting and turning on the Adjusting and turning on the

Adjusting and turning on the

fan

fan fan

fan

WARNING

: :

: Do not use this product in windows, as

a risk of electrical shock exists and serious personal

injury and/or property damage may occur.

NOTE: Unplug the product from the electrical outlet

when it is not in use or is left unattended.

□ Set your fan on a level and dry surface.

□ Make sure the rotary switch (E) is set to the "0"

(OFF) position. Plug the unit into a 120Vac 60Hz

outlet.

□ Adjust the fan head vertically to your desired angle.

□ To turn on the unit, turn the rotary switch (E) to the

"3" (HIGH), "2" (MEDIUM) or "1" (LOW) position.

□ To stop the unit, turn the rotary switch (E) to the "0"

(OFF) position, then unplug the unit from the power

outlet.

Wall Mounting

Mounting the fan to a wall

Mounting the fan to a wall Mounting the fan to a wall

Mounting the fan to a wall

□

Locate and mark the position on the wall where the

fan will be mounted (preferably at a wall stud).

□ Insert a #8 screw (bolt) into the wall stud. The screw

is not included and can be purchased at a hardware

store.

□ Leave approximately 3/8 in. of the screw (bolt)

exposed.

□ Align the opening on the base (C) of the fan with the

screw (bolt) and hang the fan on the wall.