Instructions / Assembly

ManualsBrandsUnbranded ManualsArtificial Christmas Trees7 ft. Unlit Manchester Fir Slim Artificial Christmas Tree

Christmas Tree

Model: TG70P2621X03

Sku # XXX XXX

Package Contents

Pre-Assembly

Assembling the tree stand

Assembly

Part

Description

Tree stand

Tree top

Tree center, Sticker 2

Tree center, Sticker 1

Quantity

Step 1. Choose a location near a wall outlet.

Step 2. Assemble the tree stand and place on a level surface.

Step 3. Unfold the legs of the tree stand and lay the stand

on the floor.

Step 4. Slide the locking disk of the tree stand down until

it snaps into place.

Maintenance

Care and Cleaning

Spare parts

Repairing Loose Hinges

This tree package includes hinge pins and washers for any

replacement or repair that you need to perform on your tree.

If extra parts are needed, contact the Customer Service Team

at 1-877-527-0313 between the hours of 8 am and 5 pm EST,

Monday through Friday.

Step 1. Remove all ornaments and decorations.

Step 2. Disassemble the tree from the top to the bottom.

Start with the tree top and gently lift straight up to

remove from section below and fold all branches

toward the pole.

Step 3. In case of difficulty separating the tree pole (trunk),

apply a small amount of lubricant at the joint and

rotate the upper pole in both directions. Lift up the

upper pole again.

Step 4. Continue by gently lifting straight up each section(s)

from the section below and fold all branches toward

the pole until the bottom section is removed from

the tree stand.

Step 5. Carefully place all tree sections into shipping box

and tape it shut.

Step 6. When not in use, please store your tree in a cool, dry

place away from sunlight. Exposing your tree to

excessive heat or humidity may damage your tree.

Step 1.

Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

Step 2.

Insert a new hinge pin through the holes of the

bracket

and secure with a washer.

Tree top

Section 2

Section 1

Each tree section is numbered with a tag. Please identify

all sections before assembling.

Step 1. Assemble the tree from the bottom to the top.

Start with the bottom section and remove

protective cap before inserting into the assembled

stand. Make sure the pole is firmly inserted and

secured into the stand.

Step 2. Please remove protective cap from middle section

and continue inserting into the bottom section.

Step 3. Insert the tree top into the tree center.

Step 4. Allow branches to fall into place or gently pull up

and out.

Step 5. Begin to shape the branches and tips working from

the bottom to the top. Start with tips farthest from

the pole and fan out one to the right, one to the left

and one at the center of the main stem.

Step 6.

Shape the tree from the bottom to the top. Start with

the branches farthest from the pole – fan out in a star

shape, and continue until the entire tree is shaped.

Step7. After shaping the entire tree following the previous

step, slightly upsweep all branch tips for a uniform

look. Shift branches to fill any gaps. Your Christmas

tree is now complete and ready to be decorated.

Assembling the tree

Top view

Side view

NEED HELP?

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR 1-877-527-0313