Instructions / Assembly

Safety Information
Pre-Assembly
IMPORTANT SAFETY
INSTRUCTIONS
a.READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should
always be followed, including the following:
b.Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is not
provided, contact a qualified electrician for proper installa-
tion.
c. This seasonal product is not intended for permanent
installation or use.
d.Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of
heat.
e.Do not secure the wiring of the product with staples or
nails, or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g.Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h.This is an electric product and not a toy! To avoid risk of
fire, burns, personal injury and electric shock it should not
be played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire,
or light string.
k.Do not close doors or windows on the product or exten-
sions cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material
that is not a part of the product when in use.
m.This product is equipped with push-in type lamps. Do not
twist lamps.
n.Read and follow all instructions that are on the product
or provide with the product.
o.
SAVE THESE INSTRUCTIONS
Assembling the tree
This tree assmebles with Quick Set® technology
---Set up and light up your tree in less than 10 minutes!
Step 1.Remove the protective caps from the tree bottom
and insert the pole into the tree stand.
Step 2.Continue by inserting the upper tree section(s) to
the lower section(s) until inserting the tree top.
Step 3.Shape the branches to your preference by working
from the bottom to the top. When adjusting
branches, ensure that all wires are free of branch
hinges.
Step 4.Insert Green Label Plug Into Wall Outlet. All your lights
should now be lit.
Step 5.When finished shaping the branches, slightly
upsweep all branch tips for a uniform look.
Package Contents
Assembly
Assembling the tree stand
Part Description Quantity
A Tree top, tag 2 1
B Tree bottom, tag 1 1
C Tree stand 1
Christmas Tree
Model: TG76P5347C06
Sku # 0000 000 000
Section 3
Section 2
Section 1
Do Not Tamper
Internal Parts
Open the
protective
cover
To set stand to Storage Mode
Step 1. Turn the inner pole clockwise to
unlock it
Step 2. Pull the inner pole up
Step 3.
Turn inner pole counter-clockwise
Your stand is now locked into
Storage Mode
Step 3
Step 2
Inner pole
Step 1
Step 2
Step 3
Step 4
To set stand to Display Mode
Step 1. Pull the inner pole up
Step 2. Turn inner pole clockwise to
unlock it
Step 3. Push inner pole down
Step 4.
Turn inner pole counter-clockwise
Your stand is now locked into
Display Mode
Step 1
Insert
Green Label
Plug Into Wall
Outlet
Foot Pedal
on/off Switch
50S
100S
100S
100S
100S
100S
100S
100S