Datasheet

ManualsBrandsUnbranded ManualsSensorsTemperature sensor -40 up to +125 °C Radial lead

NTC Thermistor：TGM Series

Glass Encapsulated Type for Temperature Sensing/Compensation

 Features

1. RoHS compliant

2. Glass-encapsulated and heat-resistive

3. Body size: Ф2.5mm

4. Operating temperature range: -40 ~℃ +250 ℃

5. Agency recognition: UL / cUL

 Recommended Applications

1. Home appliances

2. Automotive electronics

 Structure and Dimensions

(Unit: mm)

Series D H L d

TGMA 2.5±0.2 3.8±0.5

≧40

0.30±0.02

Distributed by Conrad Electronic,Hirschau,Germany

Summary of content (4 pages)

PAGE 1
NTC Thermistor：TGM Series Glass Encapsulated Type for Temperature Sensing/Compensation  Features 1. 2. 3. 4. 5. RoHS compliant Glass-encapsulated and heat-resistive Body size: Ф2.5mm Operating temperature range: -40℃~+250 ℃ Agency recognition: UL / cUL  Recommended Applications 1. Home appliances 2. Automotive electronics  Structure and Dimensions (Unit: mm) Series D H L d TGMA 2.5±0.2 3.8±0.5 ≧40 0.30±0.
PAGE 2
NTC Thermistor：TGM Series Glass Encapsulated Type for Temperature Sensing/Compensation  Electrical Characteristics Part No. Zero Power Resistance B Value RT Curve Max. Power Dissipation at 25℃ Dissipation Factor Thermal Operating Time Temperature Constant Range Safety Approvals (KΩ) (K) -- Pmax(mW) δ(mW/°C) τ(Sec.) UL cUL TL~TU(°C) TGMAA503F3993DA6 R100=3.3K±2%   TGMAA503F3993DA5 R100=3.3K±3%   TGMAA503F3993DA1 R100=3.
PAGE 3
NTC Thermistor：TGM Series Glass Encapsulated Type for Temperature Sensing/Compensation  Max. Power Dissipation Derating Curve TU : Maximum operating temperature (℃) 100% TL : Minimum operating temperature (℃) For example: Ambient temperature (Ta) = 60℃ Maximum operating temperature (TU) = 200℃ PTa = (TU-Ta)/(TU-25)×Pmax = 80% Pmax 0 0 TL TU 25 Ambient temperature (℃)  R-T Characteristic Curves (representative) 10000 A B 1000 C Resistance (KΩ) 100 10 1 B A 0.1 C 0.
PAGE 4
NTC Thermistor：TGM Series Glass Encapsulated Type for Temperature Sensing/Compensation  Reliability Item High Temperature Storage Damp Heat, Steady State Standard Test conditions / Methods Specifications IEC 60068-2-2 Tu ± 5℃, 1000 ± 24 hrs No visible damage ∣△R25/R25∣≦ 5 % IEC 60068-2-78 40 ± 2℃, 90~95% RH, 1000 ± 24 hrs No visible damage ∣△R25/R25∣≦ 3 % The conditions shown below shall be repeated 5 cycles. Rapid Change of IEC 60068-2-14 Temperature Max.