Instructions / Assembly

1804 EDISON STREET | PO BOX 400 | ANTIGO, WI 54409-0400
1.800.253.4737 | (P) 715.627.4826 | (F) 715.627.4871
IN F O@V OLMCOMPA NIES .CO M
WWW. VOLMC OMPANIES. COM
VOLM’S EZ Privacy Screen Installation Guide:
Step 1: Remove the EZ Privacy Screen from the packaging
Step 2: Determine your fence starting point and unroll the EZ Privacy
Screen along the fence line
Step 3: Using whatever fastener you prefer (not included), thread the
fastener through the integrated buttonhole and attached the top corner of
the mesh to the top horizontal fence frame.
Step 4: Continue down the fence line, attaching the EZ Privacy Screen to the
top horizontal fence frame by slightly stretching the fence in order to pull
out any creases in the mesh.
Step 5: When top frame is complete, start over by attaching the EZ Privacy
Screen to the bottom horizontal fence frame, and continue down the fence
line.
Step 6: Inspect all fastener to be sure they are secure.
Step 7: If you need to connect another extension on to the fence; you can do
so by lining up the side panels and fastening them together to link from one
piece of screen to the next length wise.
Step 8: In order to complete the installation, at the beginning and the end of
your fence line, cut the EX Privacy Screen with a pair a scissors to the
desired length. Please note, EZ Privacy Screen is made with a Lock Stich
construction and will not fray when cut. Attach the Mesh to the vertical
fence frame every 6-8 inches to make a neat and secure fit.