Full Product Manual

2. Press the C-F-K button to select the desired temperature unit of
measure. A display icon will reflect the selection.
3. Touch the object to be measured with the probe. Read the
measured temperature on the display.
Note: If the display indicates “OL” the temperature is outside the
measurement range. The display shows "- - - -" when a
thermocouple is not connected.
MAX/MIN/AVG mode
Press MAX/MIN to capture and step through the maximum (MAX),
minimum (MIN) and average (AVG) temperature values. These values will
be shown in the lower display with an elapsed time reference below
(hrs:mins, mins:secs).
1. Press MAX/MIN to enter this mode.
2. Press MAX/MIN to step through maximum, minimum and average
readings.
3. Press and hold MAX/MIN for 3 seconds to return to normal mode.
Data Hold
Press the HOLD button to freeze the reading in the display. HOLD will
appear at the top right of the display. Press the HOLD button again to
return to normal operation mode.
Backlight
Press the SETUP button to switch the backlight OFF/ON.
Setup option
The setup option is used to select the thermocouple type that matches the type
that will be connected to the meter, to switch the sleep mode OFF/ON, and to
adjust the thermocouple offset.
Note: In the setup mode, the upper display shows the menu items and
the lower display shows the selection for a given menu item.