Model: TR24483540KP SKU: 1004-710-580 USE AND CARE GUIDE ____________________________________ 3500K/4000K LED PRISMATIC TROFFER Questions or problems? Before returning to the store, call Our Customer Support Line 8 a.m. – 5 p.m., EST, Monday – Friday 1-866-237-9983 www.precisioncpg.
Table of Contents Table of Contents Safety Information Warranty Pre-Installation Planning the Installation Tools Package Contents Installation 2 2 2 3 3 3 4 5 Operation Care and Cleaning Exterior Maintenance Characteristics Troubleshooting FCC Notice 7 7 7 8 8 8 Safety Information WARNING: Disconnect the power prior to removing or installing a light fixture.
Pre-Installation PLANNING THE INSTALLATION Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for Proof of Purchase.
Pre-Installation (continued) PACKAGE CONTENTS E Ｂ 35K / 40K Switch Part Description D E Quantity 4 Color Select Switch 1
Installation Caution: Turn off the power at the circuit breaker 1 Positioning, Securing and Wiring the the fixture Illustration 1 the wire protector and Snap the the whip onduit into the on ture Illustration 2 Select desired Color Temperature by positioning the selector switch in the 3500K or 4000K position (Illustration 3) 4） the tile at the location where Illustration 3 (Illustration 4) 5) Place one end of the fixture (A) on the T-bar.
Ｂ If you have electrical questions consult your local electrical code for approved grounding methods. This fixture comes pre-wired. If you wish to wire another fixture to this fixture in series follow the instructions below. □ Remove the access plate located on the back of fixture (A) and locate the black, white, and green fixture wires. □ Remove the round knockout in the access plate.
Operation Turn on power at the circuit breaker or fuse box. Turn the light switch on to activate the fixture. Care and Cleaning EXTERIOR MAINTENANCE NOTE: Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully. Use a dry or slightly dampened clean cloth and wipe the surface of the fixture.
Characteristics Electrical System Input Power: Input nput Vol olttag age e: Input Frequency: Power Factor: 70W 120-277 VAC 50/60 Hz >0.9 Troubleshooting Problem Solution The light will not turn on. Make sure the power supply is on. Test or replace the wall switch. Check the wiring. The fuse blows or circuit breaker trips when light is turned on. Check the wire connections.
Questions or problems? Before returning to the store, call Customer Service 8 a.m. – 5 p.m., EST, Monday-Friday 1-866-237-9983 service@precisioncpg.com Retain this manual for future use.
