Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Contents:

1 Tree 1 Metal stand with 3 screws

1. Assemble stand as shown step①

2. Put the tree pole into the assembled stand.Making sure that it is fixed into the central support.Little

tighten the screws so that it is held securely and vertical as step②

3/4.Insert the bottom section of tree body into the tree stand, and make sure the trunk stays straight as

step③④.

5/6.Once the trunk stays straight, all the branches is opened. then insert the t ree top into the bottom

section as step⑤⑥.

⑦

CHOKING HAZARD -SMALL PARTS.

NOT SUITABLE FOR

CHILDREN UNDER 36 MONTHS.

PAGE 1
ASSEMBLY INSTRUCTIONS Contents: 1 Tree CHOKING HAZARD -SMALL PARTS. NOT SUITABLE FOR CHILDREN UNDER 36 MONTHS. 1 Metal stand with 3 screws ⑦ 1. Assemble stand as shown step① 2. Put the tree pole into the assembled stand.Making sure that it is fixed into the central support.Little tighten the screws so that it is held securely and vertical as step② 3/4.Insert the bottom section of tree body into the tree stand, and make sure the trunk stays straight as step③④. 5/6.
PAGE 2
7. When shaping the branches start with tips farthest from the pole. One to the right; One to the left and one at the center of the main stem.Finished look should be natural and full as step⑦. SAFETY: • For indoor use. • For the tree is not a toy, keep out of reach of Children. • Locate the tree on a level surface that will not be damaged by the tree or decorations that may detach. Place away from areas where the tree may get knocked. • This product is contained 4 U sharp tree stakes. It is not the toy.