Specification

1/2" NPT
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
Install the Rite-Temp valve according to the valve
installation guide.
NOTICE: Risk of product damage. Long screws,
for installing trim, can damage the K-2971-KS
valve. Consult the trim installation guide to verify
if the thin wall installation kit (88526) is needed.
Cap shower outlet if deck-mounted spout,
diverter, or handshower is connected to the spout
outlet.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between valve
and wall-mount spout.
Avoid cross-flow conditions. Do not install shut-off
device on either valve outlet.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
6-13-2016 06:35
Devonshire
®
Rite-Temp
®
Pressure-balancing Bath/Shower Trim Set with NPD Diverter
Spout
K-T395-4