Use and Care Manual

Page 5 of 6
MAINTENANCE
Only use a damp clean cloth to clean the unit. Never use chemical cleaning products, scrubbing
powder, steel wool, or hard sponges to clean the unit as it may damage to the unit.
IMPORTANT: The warranty does not cover risks of rusting. If used outdoors, the unit must be
completely sheltered from the elements. Always keep the unit away from rain and/or excessive
humidity. Keep in mind to always properly dry the unit after cleaning it with a damp cloth.
PERIODIC SERVICE REQUIREMENT: VERIFY OPERATION OF MANUAL SHUTOFF DEVICE.
INSTALLATION REQUIREMENTS
Tabletops can be used indoors, as well as outdoors.
Always position the unit at a safe distance away from all possible flammable objects such as fabrics,
curtains etc. Take into account possible air drafts coming from adjacent doors and windows to
determine the applicable safe distance from those openings to install your unit.
When not in use, store the unit indoors to prevent rust caused by excessive outdoor humidity or rain.
Always install the unit at a levelled position.
Always have safety glass installed when the unit is in use.
Make sure the burner sits firmly inside its designated slot before lighting the unit.
In case of fuel spillage, remove the burner box, wipe completely with a dry absorbent cloth and
replace the burner into the burner slot before lighting the unit.
Recommended minimum clearances around a tabletop unit
Overhead: 122cm (48in)
Sides: 30cm (12in)
Front: Accessible at all times
From floor: 30cm (12in)
Maintenance
Only use a damp clean cloth to clean the unit. Never use chemical cleaning products, scrubbing
powder, steel wool, or hard sponges to clean the unit as it may damage to the unit.
Assembling
- Place the protective glass panels into the glass slots
- Place the burner into the burner slot