SDS

SAFETY DATA SHEET
VAPORIZER LLC. Page 2 of 7 Rock Salt, Halite, Salt
Hazard Statement(s):
Precautionary Statement(s):
H315: Causes skin irritation
H319: Causes serious eye irritation
H335: May cause respiratory irritation
P261: Avoid breathing fume/mist/vapors/spray
P264: Wash skin after handling
P281: Use personal protective equipment as
required
EU HAZARD CLASSIFICATION OF INGREDIENTS PER DIRECTIVE 1999/45/EC:
[Xi] Irritant
Risk Phrases:
R36/37/38: Irritating to eyes, respiratory system and skin
Safety Phrases:
S24/25: Avoid contact with skin and eyes
S45: In case of accident or if you feel unwell, seek
medical attention immediately,
2.3 HEALTH HAZARDS OR RISKS FROM EXPOSURE:
SYMPTOMS OF OVEREXPOSURE BY ROUTE OF EXPOSURE: The most significant routes of exposure for this
product are by inhalation, skin contact, eye contact or ingestion.
ACUTE:
INHALATION: Inhalation may be irritating to the respiratory tract.
CONTACT WITH SKIN: Repeated or prolonged contact may cause skin irritation.
EYE CONTACT: Contact may irritate the eyes, resulting in redness or watering.
INGESTION: Ingestion of a large quantity may cause gastrointestinal irritation with nausea and vomiting.
CHRONIC: None known
TARGET ORGANS: Acute: Eyes, Skin, Respiratory System Chronic: None Known
3. COMPOSITION AND INFORMATION ON INGREDIENTS
Hazardous Ingredients:
WT%
CAS#
EINECS #
Hazard
Classification
Risk Phrases
Sodium Chloride
>99.5%
7647-14-5
231-598-3
[Xi] Irritant
R36/37/38
YPS (Yellow Prussiate of Soda)
Sodium Ferrocyanide
0.0015%
13601-19-9
237-081-9
Not Classified
None
YPS may be present up to 15 ppm as production process artifact.
Balance of other ingredients is less than 1% in concentration (or 0.1% for carcinogens, reproductive
toxins, or respiratory sensitizers).
NOTE: ALL WHMIS required information is included in appropriate sections based on the ANSI Z400.1-2010 format. This product has been classified in
accordance with the hazard criteria of the CPR and the SDS contains all the information required by the CPR, EU Directives and the Japanese
Industrial Standard JIS Z 7250: 2000.
4. FIRST-AID MEASURES
4.1 DESCRIPTION OF FIRST AID MEASURES:
EYE CONTACT: If product enters the eyes, open eyes while under gentle running water for at least 15 minutes. Seek
medical attention if irritation persists.
SKIN CONTACT: If product contacts skin, wash skin thoroughly with soap and water after handling. Seek medical
attention if irritation develops and persists.
INHALATION: If breathing becomes difficult, remove victim to fresh air. If necessary, use artificial respiration to
support vital functions. Seek medical attention.
INGESTION: If product is swallowed, call physician or poison control center for most current information. If
professional advice is not available, do not induce vomiting. Never induce vomiting or give diluents (milk or water) to
someone who is unconscious, having convulsions, or who cannot swallow. Seek medical advice. Take a copy of the
label and/or SDS with the victim to the health professional.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None known
4.2 SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
Exposure to this product may cause irritation to skin and eyes. Inhalation of dust may cause irritation to respiratory
system. May be harmful if swallowed with digestive tract irritation and vomiting.
4.3 RECOMMENDATIONS TO PHYSICIANS: Treat symptoms and eliminate overexposure.