Installation Guide

Water Saver for Green
User’s Manual (WS-02) Patent Pending
Trees and plants are required to protect our environment. However trees and plants need water to
survive and grow. In urban areas cost of water is continuously rising. There is increasing shortage
of water due to growth in population and global warming. This product is designed to reduce
water usage, save time and money.
Content:
(1) 4 Water Saver for Green strips 48”(L)X3”(W); (2) 4 packs of button; (3) 4 packs of stake; (4)
User’s Manual
Instructions:
1. Clean area around the plant/tree (i.e. remove fallen leaves or
rocks)
2. Water plant making the soil damp.
3. Wrap one “Water Saver for Green” around base of the plant
(Figure 1).
4. Using 4 buttons, line up 4 holes and lock “Water Saver for Green”
ends together (Figure 2).
5. Push strip into damp soil about ½ to 1 inch.
6. Using the included stakes, use 4 stakes to secure water saver to
the ground. Feel free to use a mallet if assistance is needed
(Figure 3).
7. Add some soil inside the “Water Saver for Green” strip circle.
8. Water your plant and enjoy your water saver (Figure 4).
Note: Some water may leak on first use but will stop after regular use.
Water Saver for Green, 2200 Eastridge Loop, Box 730157, San Jose, CA 95173 Phone: [phone]
www.watersaverforgreen.com Email: [e-mail] Made in USA