Full Product Manual

38
Connect Ground
Connect one side of the green cable to the ground bolt
found in the lower right corner of the panel of generator 1.
1.
Connect Positive
Connect the corresponding red cable to the red parallel
port on the front panel of generator 1.
2.
USING THE GENERATOR (CONTINUED)
Parallel Usage
Connect Negative
Connect the corresponding black cable to the black parallel
port on the front panel of generator 1.
3.
4.
38
Repeat on Generator 2
Repeat steps 1 - 3 on generator 2. Combined power will be
available from either 30A 120v receptacle.
CAUTION: Do not connect red (positive) cable to
the black (negative) receptacle. Damage to the
generator may occur.