E-commerce-Enitial Lab ASSEMBLY INSTRUCTIONS YNJ-1898C2 Tools Required for Assembly ASSEMBLY RATING The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For most products, two persons are recommended. Allen Wrench (Included) Phillips Screwdriver (Not Included) Hammer (Not Included) EASY DIFFICULT 2 PERSON RECOMMENDED Page 1 18.09.
Thank you for your purchase! We hope you will enjoy your new product for many years to come. Our commitment to providing quality products does not simply end when a purchase is made. We stand behind our products and will provide any support needed in order for you to fully enjoy your purchase. Your satisfaction is the greatest recognition we could have. Because we value your trust in our company, we will do our best to meet your service expectations.
Page 3
PRE-ASSEMBLY INTRODUCTION Unless you are particularly adept at assembling flat-pack/knock-down furniture, we understand building ready-to-assemble furniture can be a frustrating experience for some. To help avoid confusion and to make the assembly process quicker and smoother, we have provided some helpful tips. Before you begin the assembly, please read the following: 1. 2. 3. 4. 5. 6. 7.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS ly Page 5
COFFEE TABLE ASSEMBLY INSTRUCTIONS MODEL # YNJ-1898C2 Please keep for future reference PARTS LIST 24 48 .8" A S C L 15.75" Before you begin, please read "Assembly and Care Advice","PreAssembly Introduction" and "Cam Lock Fastener Assembly Instructions" " .82 M J DIMENSIONS 48.82" (W) X24.8" (D) X15.
COFFEE TABLE MODEL #YNJ-1898C2 Get Ready. Please group boards as below.
ASSEMBLY INSTRUCTIONS STEP1 Hardware #1=17pcs Hardware #3=10pcs Hardware #5=2pcs Use a dab of glue in dowel holes before inserting dowels (#3).
ASSEMBLY INSTRUCTIONS STEP2 Hardware #1=18pcs Hardware #3=12pcs 3 10 1 1 1 1 1 1 G X2 H 3 1 1 1 1 1 1 K J 3 3 L 3 3 1 1 3 1 1 3 3 M 3 N 3 3 Page 9
ASSEMBLY INSTRUCTIONS STEP3 Hardware #1=4pcs Hardware #3=6pcs 3 10 P O 3 3 1 X2 R 1 X2 Q 3 3 STEP4 Hardware #2=3pcs Please refer to page 5 on how to fasten cam locks(#2) to cam bolts (#1).
ASSEMBLY INSTRUCTIONS STEP5 Hardware #2=9pcs 1 2 K 2 2 2 P Q L 2 M 2 O K O This dowel hole of panel (#M) must be oriented as shown in the picture.
ASSEMBLY INSTRUCTIONS STEP6 Hardware #2=6pcs 1 2 F A 2 2 C 2 A E 2 D 2 C 2 Page 12
ASSEMBLY INSTRUCTIONS STEP7 Hardware #2=13pcs Hardware #4=2pcs 1 2 B 2 2 F E 2 4 2 D 2 A 4 Q 2 2 This dowel hole of panel (#D) must be oriented as shown in the picture.
ASSEMBLY INSTRUCTIONS STEP8 Hardware #2=4pcs Hardware #4=8pcs Hardware #9=8pcs 1 K 2 O 2 M 4 R 2 G P D 4 2 R 4 2 G 4 4 9 G 9 9 4 I 4 G 9 9 9 4 9 Use hammer to hammer in floor protectors (#9).
ASSEMBLY INSTRUCTIONS STEP9 Hardware #2=4pcs Hardware #4=4pcs 1 2 H 2 2 2 F 2 G 4 4 H 4 F 4 Page 15
ASSEMBLY INSTRUCTIONS STEP10 Hardware #6=1set Hardware #7=2pcs Hardware #8=4pcs 7 6 C X2 B Have a person hold onto the glass slider (#6,7) to panels (#B,C), then slide the glass (#S) to the glass slider (#6,7). Secure by using glass screws (#8). 8 S 12 8 C 12 X2 B Make sure the orientation of the glass sliders (#6) is the same as shown in this picture. Make sure the product is rested on a flat surface and does not feel loose or wobbly.
