Warranty

- 10 -
STEP 6: Attach Height Adjustment Handle
A) Mount the height adjustment handle onto the height adjustment bar. (The height adjustment
bar is located outside of the sweeper housing assembly, spanning the wheels.) Use two Hex
Bolts M8x40 (C) and Nylon Lock Nuts M8 (G) to firmly attach the handle assembly to the bar.
B) Attach the height adjustment strap to the angle bracket (mounted in Step 1). Align the round
hole in the height adjustment strap with the angle bracket. In the following order, pass Hex Bolt
M8x20 (E) through the angle bracket, the adjustable pole spacer (L), the height adjustment
strap, and the Big Flat Washer Ø8 (J). Tighten securely with Nylon Lock Nut M8 (G).
STEP 7: Mount the Connecting Rod to the Sweeper Housing
A) Mount the connecting rod using two Hex Bolts M6x12 (I) and Nylon Lock Nut M6 (H) to the
upper most mounting holes of the sweeper housing. Tighten securely.