Warranty

- 11 -
STEP 8: Assemble Hopper Bag
A) Unroll the hopper bag and place on the ground with the nylon fabric facing up and the
heavy-duty nylon floor facing the ground.
B) Inspect the first rear hopper tube (part 15) and locate the brace holes. Pass the tube through
the six sewn-in bag loops at the top of the inside of the hopper bag with the brace holes facing
downward.
C) Pass the upper hopper side tubes through the stitched sleeves on either side of the nylon
fabric. On each side, insert the upper hopper side tube into the rear hopper tube, oriented
downwards, and fasten with Plastic Plugs (Z).
D) Place the second rear hopper tube on the heavy-duty nylon floor of the hopper, with the brace
holes facing upward.
E) On each side, insert the lower hopper side tubes, oriented upwards, into the (lower) rear
hopper tube, and fasten with Plastic Plugs (Z).