Warranty

- 12 -
F) On either side, align the ends of the upper and lower hopper side tubes and fasten these
together with Clevis Pin Ø9.5x25 (P). Secure with R Pin Ø3 (N).
G) Locate the stitched sleeve at the front edge of the bag floor. Insert the bag frame strap into the
sleeve. (In some models, the bag frame strap is already inserted into the sleeve.)
H) Once inserted, mount the bag frame strap onto the lower hopper side tubes using Clevis Pins
Ø6X37 (Q). Secure with R Pin Ø2 (O).
I) Locate the snap buttons on the nylon fabric. Snap them into the rivets on the heavy-duty nylon
floor of the hopper.
CAUTION
Do not over-stress (bend) the support rods while installing. Overstressing causes the rods to bend and
lose supporting tension.
Ø3 R Pin (N)
Ø9.5X25 CLEVIS PIN (P)
Ø6X37 CLEVIS PIN (Q)
Ø2 R Pin (O)