Warranty

- 14 -
C) Tie the rope to the upper hopper tube at the center of the bag frame.
D) Insert the male ends of the bag arm tubes into the hitch tubes at the back of the sweeper
housing assembly (away from the hitch). Secure using Clevis Pins Ø6X42 (R) and R Pin Ø2
(O).
E) Remove brush protection boards from inside of sweeper housing assembly.
F) Check to see that all bolts are tightened adequately and all pins are mounted securely. If all the
components are securely in place, the sweeper is completely assembled and ready for use.