Warranty

- 8 -

STEP 1: Mount Angle Bracket

A) Remove the three splint from brush.

B) Attach the Angle Bracket (K) to the sweeper housing by using the Hex Bolt M8x16 (F) and the Nylon

Lock Nut M8 (G). Tighten securely.

NOTE: Before tightening, make sure the angle bracket is aligned straight with the sweeper

housing, as shown in the diagram.

NOTE: Right-Hand (RH) and Left-Hand (LH) refer to the drivers’ orientation when operating the

vehicle.

STEP 2: Attach Hitch Tubes

Attach the right-hand (RH) and left-hand (LH) hitch tubes (parts 1 and 2) to the sweeper housing

assembly (part 6) using Hex Bolts M6x45 (D) and Nylon Lock Nuts M6 (H). Tighten loosely.

Assembly Instruction