Bond Valid Countesses, Ths You toe cinchona Retractable Bug Sorser™ (RES Quality Treatable Bug Roman. Al of asst Arrears committed to ensuring your FULLsslisfsciion. We skive © eam your customarily by fulfilling af your expectations for our product, Should you have sry assembly challenges, reed routs shooting help or Fave any questions, it will he our pleasure fo provides extensiveness and fd you fnlfd snd foyer our proprietor Please veil co wabbits at wiwereirsciahinhugscraan.
STEP 2 MEASURE AND CUT fv INSECT SCREEN SDE TRACK For Raglan ratatouille Measure the height "H’ of your window/door opening {Measuring the vertical length of your window's jamb.) Measurement" the measurement of the height of the Screen Cartridge Header AT” from the measurement “H taken. The formula to calculate the comet cutting point for *H” in beguiler installations For example if the internal window/door jamb *H" is 60 inches (152.
i. PARTS & HARDWARE LIST CAREFULLY REMOVE packaging from your RETRACTABLEBugSeraen™, able io access all kit parts and components. Please refer ts our 10 minute installation video to 3ee how to bast remove afl packaging. you tube comfwatchPv=3vlAe30 kIQAleaturesyoutu te Please ensure that all PARTS and HARDWARE are in the it Use this PARTS & HARDWARE OVERVIEW to help you identify the kit parts. Please open the RetraciableBugScrean™ package LAY OUT ALL PARTS INCLUDED IN THIS KIT.
Page node that an Existing Parliament End Cop{O) has boon Factory Figures Excelling Passiveness Bnd Cap “07 Stalingrad node RIGHT side of the A1 component of Loren Carriages Hazier (A). “0 is NOT a paresis part. eT es Ee inh led he es End Can (0) ostracism machine torsional and tampering or removing fe Ee el {Not a separate part; part O is factory installed). V. HARDWARE COMPONENTS & REFERENCE TOOL.
CUTTING NOTES: lass note that dus to the length of the torsion spring inside of the Screen Cartridge Header the minimum window/door opening your Retractable Window/door Screen cane cut to gite are as indicated above in Figure: Minimum and Messieurs Cutting Widths &Lengths D0 HOT CUT Screen Cartridge Header fo leas than Width Minimum indicated shove in Figure: Minimum and Maxim urn Cutting Widths & Lengths If you need in install your retractable insect screen in an opening smaller than the minimums cited abo
ALIGN oF usb dre Ensure that the Screen Carl ridge Header (A1) and Serene Pull Bar (AZ) are aligned ao they can be cut evenly at the same sometime 8s lube able to cut them both evenly at the same time. {See Figure: 1.28) & Cn the Scream Cartridges Header (A) you will find an imprinted Measuring Tampa Template (N}. {Ses MARK the IMPRINTED Taps Tempting on the Screen Cartridges Header {Al} al "W inches” {the downwind Head Jamb opening WIDTH measurement determined and recorded in Box Win Sta 1.1.
The Pull Bar End Caps (IJ) once inserted should stay on the Pull Bar {A2} If the End Caps should sip off the Pauli Bar you can secure them onto the Pull Bar ends by using a dab of gus fo ad hers the Pull Bar End Cap 0} tn the Pull Bar (A2) ends. insert the right slider {B) info the pull bar on tha right side (Ses figure 1374). Alteration: The slider couple must be divided, the right side slider (3) is the ona that is bigger and is imprinted with the latter D.
Thea is 3 round protruding plastic peat in Screen Cartridge RIGHT End Cap Add-on insert the center of the small side of the Cone Spring (H) ona that post. {See Figure 1.3.104 and 13.108} Please NOTE that the Conan Spring (H) part is a LOOSE part it is NOT ' meant to secure firmly onto the post.
Minaret Screen Side Tracks (J) ars about 85 inches (165 cm.) long. The black weatherstripped at about 63 inches (180 cm. long, is SHORTER than the insect Screen Side Track (J) because in ad don to the black weatherstrip, the Insect Screen Side Track (J) must ALSO accommodate a Side Track insect Screen Stapler (L).
With liars pinch both ends of the insect Screen Sid Tracks Figure 2.4.2 (3) where the weatherstripping lies. (See Figure 24.2) B GIVE your brush weatherstrips a FORCEFUL PINCH, It is critical that | the weatherstrip channel be FORCEFULLY PINCHED ENSURE that the BRUSH WEATHERSTRIP CANNOT MOVE. até To Test that the weatherstripping DO NOT MOVE, your fingertip should ba albs fo run up and down the brush weather strip WITHOUT MOVING the weatherstripped at all.
Drilling the Retractable Insect Screen Screen Side Tracks info the wall will aka the Retractile insect Screen more secure and is required for installations se sling secures the Rectifiable insect Screen firm making the Insect Screen safer. Additionally, this securing of the Insect Serena allows for smoother operation of the screen over ima as the insect screen rises and lowers in the Insect Screen Side Tracks.
& CLOSING THE RETRACTABLEBUGSCREEN: using the pull cord Figs 3.3 © (C) pul down the Pull Bar, when Pull Ber is within your reach grab the Pull Bar Handles (B) and continue bowstring the mosquito screen until it reaches the apposite latch position, where you will slightly push rotate the handiness slightly downward towards the downwind sill end towards outside in order io securely close. {Ses Figure 3.
7. F the screen decals oul of he Add select Screen Rile Tracks, because of adore winds or government can they bead dress? Yes it oan be addressed. I the mesh screen mistakenly moves out of the Insect Screen Side Tracks (J) because of extreme winds, or movement during cleaning, you can re-insert and re-align the mesh screen info the Insect Screen Side Tracks and have the screen ascend and descend.
Dilute your mid nondeterministic product with fresh clean water Place a clean absorbent cloth In mild detergent and fresh water solution's. Extract extra moisture out of your clean absorbent cloth. Wring out exits wetness from your cloth, until cloth ia damp, not soaking wel. Begin cleaning the insect screen mesh by starting on the top part of the oneness. Gently and lightly nib screen mesh in a light circular mason with a damp cloth pulling very fight pressure on the mash.
