Installation Manual

TONNEAU INSTALLATION GUIDE
[phone] www.undercoverinfo.com
1
Minute
Removal
1
Minute
Re-Install
UNDERCOVER REMOVAL & REINSTALATION INSTRUCTIONS
C D
F
G
A
B
E
UNDERCOVER
TONNEAU
INCORRECT
PLACEMENT
OF FRONT
FLAP SEAL
Model 4050 Toyota Tacoma Quad Cab 2005–Current w/Multi-Track System
Page 9
FORM # IG4050
Modified April 2005
Release strut off of ball
stud. Holding tonneau up with one
hand, place loose end of strut on
storage clip. Repeat for the other
side
Picture A & B.
With cover closed,
remove spiral rings at the front of
the tonneau. BE SURE TO HAVE
STEP 1 COMPLETED FIRST
Picture C.
Now carefully remove
the tonneau off of the truck bed
Picture G.
Step 3
Step 2
Step 1
Your 30-minute installation job is now complete. Now, in less than one
minute, you will be able to put on and take off your tonneau cover.
Congratulations!
Place tonneau on the truck
bed positioning hinges over front
bracket tangs Picture D.
Install spiral rings on tangs
to secure cover
Picture C. Open
tonneau with and attach strut to ball
stud
Picture A & B.
Be sure that the front flap
seal is hanging over the bulkhead, not
rolled under the tonneau after
installation
Picture E & F.
Step 3
Step 2
Step 1