User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Safety
- 1 Important safety directions
- 2 Electrical safety
- 3 Mechanical safety
- 4 Explosion safety
- 5 Fire safety
- 6 Electrostatic discharge (ESD)
- 7 Electromagnetic Compatibility (EMC)
- 8 Modality specific safety
- 9 Network safety, security and privacy
- 10 Toxic or hazardous substances and elements
- 11 Equipment label overview
- 3 Using the Base Station
- 4 Using DoseView
- 5 Using the PDM
- 6 Using the Cradle
- 7 Maintenance
- 8 Troubleshooting
- 9 Product disposal
- 10 Technical data
User Settings menu
Figure 3.7 The User Settings menu
The User Settings menu consists of one screen.
Adjust the backlight level of the screen by moving the bar horizontally. This
change will take effect immediately.
Admin Settings menu
The Admin Settings menu consists of four screens. Access
these screens by tapping the arrow buttons in the lower right corner
of each screen.
Base Station Name and Base Station Location menu
Enter name and location of the Base Station (see figure below). This
information is used to identify the Base Station so that it can be detected in
Dose Manager.
3.3 Base Station features
3-12
Using the Base Station
DoseAware Base Station Package Document version 1.2
P h i l i p s H e a l t h c a r e 9 8 9 6 0 0 2 1 6 6 2 3 0 9 0 0 a 4 4 7 8 0 0 4 5 a 3 a
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60