User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Safety
- 1 Important safety directions
- 2 Electrical safety
- 3 Mechanical safety
- 4 Explosion safety
- 5 Fire safety
- 6 Electrostatic discharge (ESD)
- 7 Electromagnetic Compatibility (EMC)
- 8 Modality specific safety
- 9 Network safety, security and privacy
- 10 Toxic or hazardous substances and elements
- 11 Equipment label overview
- 3 Using the Base Station
- 4 Using DoseView
- 5 Using the PDM
- 6 Using the Cradle
- 7 Maintenance
- 8 Troubleshooting
- 9 Product disposal
- 10 Technical data
Make sure that the computer’s clock is correct, otherwise the dose history data will
be shifted in time and therefore not accurate anymore.
• If you need to change hour-portion of time, the dose history will have to be
reset. This is done automatically; you just need to confirm the action. When you
synchronize PDM’s time the internal clock will be synchronized to the same time as
the host PC, including the Windows time zone settings. If you are using multiple
PDMs, it is important to synchronize time for the PDMs with the same PC, because
they will have the same time reference.
• If you need to change the time backwards to where there is dose history stored,
the dose history will have to be reset. This is done automatically; you just need to
confirm the action
• The synchronization takes immediate effect and you do not need to press the
|Save| button.
W A R N I N G
N O T E S
PDM panel 4.4
DoseAware Base Station Package Document version 1.2
Using DoseView
4-11
P h i l i p s H e a l t h c a r e 9 8 9 6 0 0 2 1 6 6 2 3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60