User's Manual
Table Of Contents
- Contents
- 1 Introduction
- 2 Safety
- 1 Important safety directions
- 2 Electrical safety
- 3 Mechanical safety
- 4 Explosion safety
- 5 Fire safety
- 6 Electrostatic discharge (ESD)
- 7 Electromagnetic Compatibility (EMC)
- 8 Modality specific safety
- 9 Network safety, security, and privacy
- 10 Toxic or hazardous substances and elements
- 11 Equipment label overview
- 3 Get to know Dose Manager
- 4 Use Dose Manager
- 5 Product disposal
- 6 Technical data
Dose tab — View the current accumulated dose
for the PDM and reset Dose Session 1 and 2. The action
reset Dose Session is applied immediately and also exits the dialog.
Figure 4.3 PDM settings Dose tab
4 Wait for a few seconds before you remove the PDM from the Cradle after
you have saved the changes.
Collect data from PDM
Follow the instructions below to collect data from a PDM:
1 Make sure that a Cradle is connected to your computer’s USB port.
2 Insert a PDM in the Cradle.
The computer will detect the PDM automatically and the PDM
information will appear in Dose Manager.
4.1.2
4.1 Get started with Dose Manager
4-4
Use Dose Manager
DoseAware Dose Manager Package Document version 1.2
P h i l i p s H e a l t h c a r e 9 8 9 7 1 0 0 0 1 2 7 3 0 9 0 0 a 4 4 7 8 0 0 4 5 a 3 b
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60