User's Manual

Finding Base Stations on a local network might not be possible due to the
network configuration. If you cannot find a Base Station that is installed on
your local network it can also be added to the list of Base Stations for Dose
Manger using its network IP address. The IP address used by the Base
Station can be found in its network setup menu.
Troubleshooting
If communication with a Base Stations that has been manually added to the
list by using its network address does not work, it might be a result of
network configuration. Make sure that the Base Station and Dose manager
PC is connected to the same network and use the same subnet mask. If the
problems cannot be resolved, contact the local network administrator.
Collect data from USB
Follow the instructions below to collect data from USB:
1 Click the button Synchronize USB in the Home toolbar.
2 Select the folder from which to synchronize Base Station data.
3 Click OK.
4.1.4
4.1 Get started with Dose Manager
4-6
Use Dose Manager
DoseAware Dose Manager Package Document version 1.2
P h i l i p s H e a l t h c a r e 9 8 9 7 1 0 0 0 1 2 7 3 0 9 0 0 a 4 4 7 8 0 0 4 5 a 3 b
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60