Product Introduction Note: Dear customer : 1. When pair with the mobile phone ,function available Thank you for purchasing our high quality electronic of the headset may change according to type of the product. This product uses international advanced mobile phone. Bluetooth wireless audio transmission technology, 2.
On Turn on the headset by pressing the Power button until the blue light flash,and it will be on the pair condition. play / pause LED power Off Turn off the headset by pressing the Power button until the blue light shuts down. Pair You must establish the connection between the headset and If the mobile device support Bluetooth and has a music player , a compatible device by pairing before you can start using. you can play music by the headset .
A. Ensure that the mobile device or a music player is on and and then establish a connection. the headset is closed. E . When the headset is connected to the device and ready B. Open the headset,it will enter pairing mode, the blue for use, the blue light is on for the whole time. light starts to flash quickly. F. If you want to disconnect the connection between the C.
In order to achieve the most ideal effect,slip each one direction on Operation: For ward/Backward: Slip left or right on sensor board. the sensor board for 2/3 length. Play / Pause: Press the play / pause button or click the sensor board twice. Volume Up/ Down: Slip up or down to increase/ reduce the volume.When you want to continue increasing/ reducing the volume,slipe sensor board up/down for 2/3 length and then hold it. Answer : Press the play / pause button or click the sensor board twice.
NFC Automatically turn off function: If the headset is not connected with any equipment in about 10 minutes, it will automatically shut down for power saving. NFC function: Mobile phone itself must have the function of NFC. Put mobile phone to the left side of ABH802 NFC region. If successfully connected, it will issue a“du” sound and shows the connection is successful on the phone. If you want to disconnect the headset,then put it again to the mobie phone NFC region,then they will disconnect.
Charging When it is charging , the green lights. Note: When the charging is completed, the green indicator light The headset is built with non removable and rechargeable is extinguished, charging adapter/wire can be removed. batter y inside, do not remove the batter y or so as not to damage the headset .
Safety In order to obtain the best sound effects, please pay attention to distinguish between left and right side of the headband.; do not disassemble the hardware; use dr y and soft cotton to clean the headset etc. We recommend you take the following preventive measures to prevent hearing loss : If the volume is too large, may cause hearing loss.Adjust the appropriate volume from the minimum, increase slowly until the sound is comfortable, clear and without distortion.
Specifications 1. Connecting way:Bluetooth&Line In 2. Bluetooth® :Bluetooth V4.0 3. Transmission Mode :GFSK 4. Operating voltage:3.7V 5. Signal-to-noise ratio : > 80dB 6. THD : < 1% 7. Frequency response :30Hz-20KHz 8. Technical :guesture recognition ,AAC,apt-X,DSP,NFC; Features 1. Near Field Communication(NFC) function for connecting more convenient 2. Built-in CVC echo cancellation,double mic and DSP Noise reduction :clear communication 3. Display headset's batter y on the iPhone ,IPad,IPod 4.
广州雅天科技有限公司 ARTISTE TECHNOLOGY LTD. ADD: No. 6 Building, 173#, Dunhe Road, Haizhu District, Guangzhou City, Guangdong Province, China Telephone: +86-020-66319168 Mobile Phone: +86-13450 382195 Web: http://artiste.en.alibaba.