User Manual

BLUETOOTH PAIRING
1. Press.and hold the Power On/Off Button for approximately 6 seconds
2. Turn on the speaker system by pressing the POWER button, Indicator Bar then glows in Blue.
3. When pairing the system to Bluetooth Source Device (e.g. Mobile Phone), press Pairing button
once, Indicator Bar then blinks in Blue. Select the system name “AR SPEAKER” that shows on
the pairing list. Default Pairing Code is “ 0000 “.
4. When the Speaker and Bluetooth Source Device are successfully paired up, the Indicator Bar
then glows steadily in Blue.
OPERATION
1. Switch on the Speaker by Pressing the Power Button once, Indicator Bar then glows in Blue.
2. Switch on the Bluetooth Source Device (e.g. Mobile Phone) to which the Speaker is paired up.
Play Music from the Bluetooth Source Device, and adjust Master Volume to Middle.
3. Music should be heard from the Speaker, adjust the Volume from the Speaker to desired level
by pressing
and .
4. If the Volume Intensity from the Speaker is too weak, adjust the Master Volume from the
Bluetooth Source Device accordingly.
5. To switch off the Speaker, simply press the Power button once again.