User's Manual

P. 2
HEADPHONE RECEIVER
1. To install or replace the rechargeable batteries, carefully remove the leather
padding around the left and right earphone plates out from the cabinets.
2. Insert 2pcs of AAA size rechargeable batteries (supplied in the package) into
the right earphone’s battery compartment and 1pc of AAA size rechargeable
battery (supplied in the package) into the left earphone’s battery compartment.
Make sure the batteries are placed at the right polarity.
3. Cover the leather padding back after inserted the batteries.
OPERATION
Transmitter
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with. The Signal / Power LED (Red) on the transmitter will light up when
it receives the audio signal.
Headphone
1. Turn on the headphone by pressing the Power button. The POWER LED (Red)
will light up, the green LED will be flashing until signal link between transmitter
and receiver is established.
2. Gently place the headphone on your head and adjust for comfort. To obtain the
desired sound level, you can adjust the volume control on the headphone. If
interference or poor signal reception occurs, the headphone will perform the
muting function automatically, and it will search the best channel. The green
LED will be flashing when it is searching for the best channel.
3. Charging the batteries
a) Turn OFF the headphone first.
b) Place the headphone on the transmitter charging cradle. The charging
process begins automatically, and the green LED will light up when the
charging contacts of transmitter and headphone are made successfully.
When the charging process is completed, the green LED will turn off.
c) With the smart speedy charging function, the headphone could be fully
charged within 4-5 hours. If the headphone is not in use, please place it
back to the transmitter charging cradle.