User's Manual

P.3
INSTALLATION
TRANSMITTER
1. Connect the supplied AC/DC power adaptor to an electrical wall outlet.
2. Plug the AC/DC power adaptor in the DC jack located on the rear of the transmitter.
3. The rear of the transmitter has one audio cord that can be connected to audio output
jack of TV, VCR, Hi-Fi, CD/MP3/VCD/DVD players or to headphone/earphone jack
with the connector provided.
Plug the adaptor in the AC source and connect the audio plug to the audio source. The
transmitter will automatically switch on and the red LED will light up when it receives an
audio signal.
HEADPHONE RECEIVER
1. To install or replace the rechargeable batteries, carefully remove the leather padding
around the left and right earphone plates out from the cabinets.