DHP190 2.4GHz Digital Wireless Headphone User’s Manual Please read before using the equipment.
INTRODUCTION This 2.4GHz Digital Wireless Headphone uses latest digital wireless technology that enables you to enjoy music and TV sound anywhere inside your home. Simply connect the transmitter to a desired audio source: DVD player, CD player, TV set, VCR or Hi-Fi system. Without complicated wiring and installation with your Audio/Video equipments and rear channel amplifier, the system enables you to enjoy thrilling, lifelike sound in minutes. FEATURES 1. 2.4GHz Digital UHF Technology. 2.
COMPONENT PART LIST A) B) C) TRANSMITTER 1. Power & Charging indicator. 2. Charging pins. 3. Audio IN socket. 4. DC IN socket. 5. Volume Up & Down Control. 6. Charging LED indicator. 7. Charging contacts. 8. ON/OFF Control. 9. Power LED indicator. 10. RCA cable. 11. NiMh batteries for Headphone HEADPHONE RECEIVER ACCESSORIES (3 pieces). 12. 3.5mm to 6.3mm adaptor plug. 13. AC/DC adaptor ( 1x 9V 400mA for transmitter). P.
INSTALLATION TRANSMITTER 1. Connect the supplied AC/DC power adaptor to an electrical wall outlet. 2. Plug the AC/DC power adaptor in the DC jack located on the rear of the transmitter. 3. The rear of the transmitter has one audio cord that can be connected to audio output jack of TV, VCR, Hi-Fi, CD/MP3/VCD/DVD players or to headphone/earphone jack with the connector provided. Plug the adaptor in the AC source and connect the audio plug to the audio source.
2. Insert 2pcs of AAA size rechargeable batteries (supplied in the package) into the right earphone’s battery compartment and 1pc of AAA size rechargeable battery (supplied in the package) into the left earphone’s battery compartment. Make sure the batteries are placed at the right polarity. 3. Cover the leather padding back after inserted the batteries. OPERATION Transmitter 1. Turn on the audio source (TV or audio component) to which the transmitter is connected with.
2. Gently place the headphone on your head and adjust for comfort. To obtain the desired sound level, you can adjust the volume control on the headphone. After you have adjusted the volume in the first time, the smart built-in volume memory will memorize your latest volume level automatically. 3. If interference or poor signal reception occurs, the headphone will perform the muting function automatically, and it will search the best channel out of the 26 channels available.
c) With the smart speedy charging function, the headphone could be fully charged within 5 hours. If the headphone is not in use, please place it back to the transmitter’s charging cradle. Important: 1. Switching Off a) For protection of the transmitter and power saving, the transmitter will switches off automatically if there is no audio source signal for 3 minutes. If the audio source signal returns, the transmitter will automatically switches back on. Then, power on the headphone again.
DISTORTION - Ensure the volume level of headphone is set to an approximate level. - The headphone is too far from the transmitter, move it closer. - The audio signal input level is too low. Increase the volume of the audio source. TECHNICAL SPECIFICATIONS Transmission Mode : UHF stereo Carrier Frequency : 2.4GHz Digital Operation Voltage : Transmitter, DC 9V 400mA Headphone, 3 x AAA size Rechargeable NiMh batteries (included) Frequency Response : 30Hz – 20KHz Distortion : 0.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. P.
