User's Manual

INSTALLATION
TRANSMITTER
1. Connect the supplied AC/DC power adaptor to an electrical wall outlet.
2. Plug the AC/DC power adaptor in the DC jack located on the rear of the transmitter.
3. The rear of the transmitter has one audio cord that can be connected to audio output jack of TV,
VCR, Hi-Fi, CD/MP3/VCD/DVD players or to headphone/earphone jack with the connector
provided.
Plug the adaptor in the AC source and connect the audio plug to the audio source. Turn on audio source,
then the transmitter will automatically switch on and the Red LED will light up when it receives an audio
signal.
12
HEADPHONE RECEIVER
1. To install or replace the rechargeable batteries, carefully remove the earpad mounting from the right
earphone cabinets.
2. Insert 2 pieces of AAA size rechargeable batteries (supplied in the package) into the right earphone's
battery compartment (supplied in the package). Make sure the batteries are placed at the right
polarity.
3. Snap the earpad mounting back to the earphone cabinet after inserted the batteries.