User's Manual

(Con'd)

4. Charging the batteries

a) Turn OFF the headphone first.

b) Place the headphone on the transmitter's charging cradle. The charging process

begins automatically, and the charging LED will light up in red when the charging

contacts of transmitter and headphone are made successfully. When the charging

process is completed, the charging LED will light up in green.

c) With the smart speedy charging function, the headphone could be fully charged

within 5 hours. If the headphone is not in use, please place it back to the

transmitter's charging cradle.

Each Page in Size 148 x 210 mm

IMPORTANT

1. Switching Off

a) For protection of the transmitter and power saving, the transmitter will switches off

automatically if there is no audio source signal for 3 minutes. If the audio source

signal returns, the transmitter will automatically switches back on. Then, power on

the headphone again.

b) The headphone will switch off automatically if there is no signal from the transmitter

for 2 minutes.

2. Make sure the headphone is turned off when charging is in process.

3. Only use the included rechargeable AAA batteries. When the headphone is not in use,

turn the headphone OFF.

4. To ensure a long service life, fully charge the batteries before using the headphone for

the first time. The initial charge takes 5 hours to complete. Ensure the charging socket

located on the right earphone connects securely with the charge prongs on the

transmitter cradle.

This device must be used with the AC/DC adaptor supplied in the package.

CHARGING LED

(Red / Green)