User's Manual
7
REPLACING BATTERIES
Rechargeable batteries have a long service life. If it is however necessary to
replace them, proceed as described below:
1. Carefully pull out the right-side (R) earpad holder from the receiver
headphones. Install the 2 new rechargeable batteries in their housings as
illustrated. Check the correct +/- polarity.
2. Put back the earpad holder into the receiver headphones and make sure to
align the plastic holding slots on the receiver headphones.
Only use rechargeable batteries of the type specified under the “Technical
specifications” heading.
The rechargeable batteries supplied with the receiver headphones must absolutely
not be taken apart, disposed of in an open fire or short circuited.










