User Manual

CHARGING THE BATTERIES
1. Select the On/Off Switch in the
Headphone Receiver to OFF position.
2. Place the Headphone Receiver on
the Transmitter, make sure the Charge
Contact touches the Charge Pins on the
Transmitter.
3. The Charging process starts automatically
with the Charge/Transmit Indicator LED glows
in Green constantly; the Transmitter will not
over-charge the batteries. The Green
LED will turn OFF in about 14 hours.
Make sure to charge new batteries for
24 hours before using them for the first time in the Headphone Receiver.
WARNING:
Never attempt to recharge conventional dry cells.
Batteries (battery pack or batteries installed) shall not be exposed to excessive
heat such as sunshine, fire or the like
Never use another type of battery or non-rechargeable batteries to replace the
rechargeable (LR03/AAA) batteries supplied. When the headphones are not in
use, move the switch to the OFF position to avoid damaging the batteries.
The batteries must always be fully charged before first use. An initial 24 hours
charge is required to guarantee an acceptable service life for the rechargeable
batteries. Always ensure that the Headphone Receiver is switched to the Off
position while the batteries are charging.
Excessive sound pressure from earphones and headphones can cause hearing
loss.
IMPORTANT:
This unit should be operated with rechargeable batteries only. When replacing the
batteries or when disposing of the unit, always comply with applicable laws relating
to the disposal of batteries. Please place them in a proper disposal container to
ensure that they are eliminated safely and in an environmentally friendly way.