User's Manual

5
4. Push the “SCAN” auto-tuning button on the speaker or Remote Control to get the best tuning
reception.
When the button is pressed, frequency tuning starts automatically and it stops when a signal is
detected.
A). Keep a distance of the speaker up to 7 meters apart from transmitter, and then press “SCAN”
auto-tuning button for best tuning reception.
B) Whenever you find frequency jam, move your channel switch from one channel to the other
channel (there are two channels for selection) on the transmitter, and then press the “SCAN”
auto-tuning button again.
5. The BOOST BASS button can be used to enhance the bass sound depending on your own music
preferences. Turn bass/boost effect ON simply by pressing the button, and pressing it once again
to OFF.