User Manual

P. 2
DISTORTED
- Press the “AUTO TUNE” button on the speakers until matching the
frequency of the transmitter.
- Change the position of the channel selector on the transmitter. You
must then press the “AUTO T
UNE” button on the speakers.
-
Battery capacity is too low. Replace with the new battery.
-
Ensure the volume level of speakers is adjusted properly.
-
The speaker is too far away from the transmitter, move it closer.
-
The input level of the audio signal is too low. Turn up the volume of the
audio source equipment.
TECHNICAL SPECIFICATIONS
Transmission Mode : UHF
Frequency Range :
Operation Voltage : Transmitter, DC 12V 200mA
Speaker, 6 X D size Alkaline batteries or DC 9V
1.2A adaptor.
Remote Control, 2 X “AAA” size
Alkaline
batteries (not included).
Frequency Response : 40Hz – 12KHz
Distortion : 1%
S/N Ratio : 65dB (typical)
Channel Separation : 50dB (typical)
Operation Distance : Up to 50 meters (open area)
Output Power : 2 x 5Watts (RMS)
912.0 MHz, 912.5 MHz, 913.0 MHz